工艺条件
Condition
|
种类Designation |
牌号Designation |
规格（目）Spectcations
(mesh) |
特性与用途
Charactreristics and Applictions |
| 喷焊Spray Welding |
镍基 |
Ni20 |
-150+400 |
Mild,free-cutting,resistant tc shock,Suitable
for iron repaining glass die etc |
| Ni25 |
-150+400 |
Mild,free-cutting,resistant tc wear,Suitable for
iron & steel,and the same as above |
| Ni25B |
-150+400 |
Free-cutting,tough,resistant to
shock,corrosion,heat:Applications as above |
| Ni35 |
-150+400 |
Machinable with carbide tool.Resistant to
weae,hotshock ,Suitabel for punch,flank |
| Ni45 |
-150+400 |
It should be grinded .Resistant to sharp
shock,heat.Suitable for exhaust valve,valve gate |
| Ni55 |
-150+400 |
It should be wet grinded Resistant to
weat,corr,heat.Suitable for guides & guards of rolling. |
| Ni60 |
-150+400 |
Hardly cutted Very small friction
coefficient.Suitable for drawing block,cam,&piston etc. |
| Ni62 |
-150+400 |
Resistang to high temp.&abrasive
wear.Suitable for anti - explosion machinery etc. |
| 钴基 |
Co42A |
-60+200 |
Resistant to Wear at high temp.& combustion
corrosion.Suitable for plasma flame,spraywelding of hot exhaust valve and
high -temp.&press.Valve etc. |
| Co42B |
-60+200 |
Resistant to cavitation corrosion.Suitable for
plasma flame spray welding of hotdie,steam turbine impeller,fence board of
chain saw and the same as above. |
| Co42C |
-60+200 |
Resistant to wear,finely machinable.Used for
resurfacing-welding of strrlrail. |
| Co50 |
-150+400 |
Resistant to shock,corosion.Used for steel
rail,syre,gear,&casting etc |
| 铁基 |
Fe30 |
-150+400 |
Resistant to wear,corrosion,machinable specially
usrd for the tight plane of low-press vale. |
| Fe30A |
-150+400 |
Anti-wearing.Used for repairing the vulnerable
parts at room -temperature. |
| Fe30B |
-150+400 |
Hardly cutted,anti-wearing.Used for
mining,agricultural,&engineering mahinery etc |
| Fe45 |
-150+400 |
As above |
| Fe50 |
-150+400 |
Highly restistant to abrasive particle
abrasion.Used for petroleum driling connector etc. |
| Fe55 |
-150+400 |
As above Used for mining,agricultural machinery
and petroleum driling connetor etc. |
| Fe60 |
-150+400 |
Over-hard.Resistant fo particle washing
abrasion.Suitablr for fan blade and screw conveyor etc. |
| Fe65 |
-60+200 |
Highly anti-wearing.Suitable for the situation of
strong abrasive partical abrasion. |
| 碳化钨型 |
NiWC25 |
-150+400 |
As above |
| NiWC35 |
-150+400 |
Good performance at high Temp.Restistant to
combustion corrosion. |
| NiWC50 |
-150+400 |
Free-cutting,low friction coeffcient.Used for
cylinder.&casting etc. |
| FeWC35 |
-150+400 |
Resistant to wear & corrosion,Specially used
for middle and/or low prees.valve |
| CoWC35 |
-150+400 |
Arti-corroskon,Easily cutted Used for all of the
bearing & axles. |
| 铜基 |
Cu150 |
-150+400 |
Good corrosion resistance Used for printing
roller,motor axle & pistion etc. |
| Cu150 |
-150+400 |
Harder,anti-wearing.Used for axle of
machine,crank shaft,rolling-roller. |
| 镍基 |
Ni180 |
-120+320 |
Tough,free-cutting.Used for repairing the surface
of every kind of bearings & asxesl |
| Ni222 |
-120+320 |
Hard,good wear resistance and anti-compressiom.Used
for piston,bearing etc. |
| Ni320 |
-120+320 |
Harder,good wear resistance and anti-compression,Used
for spray coating. |
| 喷涂Spray Coating |
铁基 |
Fe250 |
-120+320 |
Harder,Used for press piston,miling
barrel,hydraulic driving parts. |
| Fe280 |
-120+320 |
Free-cutting,small ftiction coefficient.Used for
Cu-,Al-alloy parts |
| Fe320 |
-120+320 |
As above. |
| Fe450 |
-120+320 |
|
| 铜基 |
Cu150 |
-120+320 |
|
| Cu180 |
-100+320 |
|
